Ok so you want to build your own
flowbench?
I've had alot of interest in the
parts I used to build my own bench so I figured I'd setup a webpage
to
offer them to the DIY'er and make a couple $$$'s to offset the flowbench
forum cost.
Here are some parts I manufacture that you can use
in building your own bench.
|
Custom machined averaging
pitot tubes
Machined for 3", 2" and 1.5" Standard PVC schedule
40 pipe (custom sizes available upon request).
Drill an 1/8"
hole insert one of these drill another hole for your static pickup
and u are ready to test airflow.
Price per averaging pitot
tube is: $10.00 each.
Shown in this pic are the 3" and 1.5"
size.
|
 Top  Bottom
Custom
|
Sharp
edge orifices custom machined to your specs. Price based on design,
email me for more info.
Basic plate 6" x 6" is $25.00 with a 1.500 orifice
hole
Manufactured from 1/8" thick aluminum.
They can
be used for an orifice style flowbench or a calibration plate for
your own style of flowbench.
|
Future products planned:
- Complete flow elements using an averaging pitot tube and PVC pipe.
- Honeycomb flow straighteners adaptable to standard PVC pipe
Payments
can be made via Paypal (preferred) Cash, or Check
please contact
me for payment instructions
|
|
Home
This page last modified on
01/16/2005 | 
